Replacing A Jcs 1200 Switch Module Filler Tray; Removing A Jcs 1200 Switch Module Filler Tray; Installing A Jcs 1200 Switch Module Filler Tray; Figure 84: Removing And Installing A Jcs 1200 Switch Module Filler Tray - Juniper JCS 1200 Hardware Manual

Replacing a JCS 1200 Switch Module Filler Tray

Topics include:

Removing a JCS 1200 Switch Module Filler Tray

Figure 84 on page 145 shows how to remove and install a switch module filler tray.

Figure 84: Removing and Installing a JCS 1200 Switch Module Filler Tray

To remove a switch module filler tray (see Figure 84 on page 145):
1.
2.
3.
4.
Removing a JCS 1200 Switch Module Filler Tray on page 145
Installing a JCS 1200 Switch Module Filler Tray on page 146
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and
connect the strap to one of the ESD points on the chassis.
Remove the switch module or filler from the switch module bay (see "Removing
a JCS 1200 Switch Module or Module Filler" on page 143).
Pull the filler tray release handle to the open position. The filler tray moves out
of the bay approximately 0.25 in. (0.6 cm).
Slide the filler tray out of the bay.
Chapter 10: Replacing Components in a JCS 1200 Platform
Replacing a JCS 1200 Switch Module Filler Tray
145