Table 32: Jcs 1200 Alarm Panel Interface Connector Electrical - Juniper JCS 1200 Hardware Manual

Juniper Control System (JCS) 1200 Platform Hardware Guide
JCS 1200 Alarm Panel Module Interface Connector Electrical Specifications
Table 32 on page 194 lists the electrical specifications for the JCS 1200 alarm panel
interface connector.
Table 32: JCS 1200 Alarm Panel Interface Connector Electrical Specifications
Related Topics
194
JCS 1200 Alarm Panel Module Interface Connector Electrical Specifications
Connecting the JCS 1200 DC Platform to DC Power on page 63
Item
Outputs
Voltage range
Current range
Worst-case VA
Inputs
Voltage range
Differential input voltage
Reset Input Activation
Pulse width
JCS 1200 Alarm Panel Module Description on page 12
JCS 1200 Alarm Panel Module Connectors and LEDs on page 12
Replacing a JCS 1200 Alarm Panel Module or Module Filler on page 96
Specification
0 V DC to –100 V DC (maximum current 0.3 A at 100 V DC)
0 A to 1 A (maximum voltage 30 V DC at 1 A)
1 A at –30 V DC (30 VA maximum) indefinitely
0 V DC to –100 V DC (including transients)
3 V DC to 72 V DC
200 ms (minimum) to 300 ms
NOTE: The reset input resets only the state of the relay
contact. The chassis alarm status does not change.