Figure 47: Cutouts On The Jcs 1200 Bezel Filter - Juniper JCS 1200 Hardware Manual

Figure 47: Cutouts on the JCS 1200 Bezel Filter

Lay the new filter on a clean flat surface and orient it so that the cutouts for the
3.
light path extension assemblies are to the right and the large cutout at the bottom
of the filter is closest to you.
Orient the filter frame to the filter and place the filter frame on top of the filter;
4.
then pick up the filter assembly and install it into the bezel.
Secure the air filter assembly by pulling out and rotating the air filter assembly
5.
locks until they engage the air filter assembly.
Chapter 10: Replacing Components in a JCS 1200 Platform
Installing the JCS 1200 Bezel Filter
109