Disconnecting Power From The Jcs 1200 Platform - Juniper JCS 1200 Hardware Manual

The Routing Engines in the JCS 1200 platform are connected to power but are not
turned on. After the JCS 1200 platform has power, depending on the configuration
settings, the Routing Engines might have to be individually turned on.
Related Topics

Disconnecting Power from the JCS 1200 Platform

You can disconnect power from the JCS 1200 platform by powering off the Routing
Engines and disconnecting the JCS 1200 platform from the power source.
To disconnect power from the JCS 1200 platform:
1.
2.
3.
NOTE: After you disconnect the JCS 1200 platform from power, wait at least 5 seconds
before you connect the JCS 1200 platform to power again.
JCS 1200 Platform Power Overview on page 61
JCS 1200 DC Power Electrical Safety Guidelines on page 175
Replacing a JCS 1200 DC Terminal Cover on page 115
Preventing Electrostatic Discharge Damage to the JCS 1200 Platform on page 154
Powering On a JCS 1200 Routing Engine on page 73
Connecting the JCS 1200 AC Platform to AC Power on page 62
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and
connect the strap to one of the ESD points on the chassis.
Power off each Routing Engine (for more information, see "Powering Off a
JCS 1200 Routing Engine" on page 74).
Disconnect power from the JCS 1200 platform.
JCS 1200 DC platform:
Chapter 7: Connecting the JCS 1200 Platform
Disconnecting Power from the JCS 1200 Platform
65