Replacing A Jcs 1200 Bezel Collar; Removing A Jcs 1200 Bezel Collar; Installing A Jcs 1200 Bezel Collar; Figure 37: Installing A Jcs 1200 Bezel - Juniper JCS 1200 Hardware Manual

Figure 37: Installing a JCS 1200 Bezel

To install a bezel (see Figure 37 on page 99):
1.
2.
3.
4.
5.
Related Topics

Replacing a JCS 1200 Bezel Collar

Topics include:
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and
connect the strap to one of the ESD points on the chassis.
Holding the sides of the bezel, orient the bezel so the logo is at the top and right
corner.
Place the bottom edge of the bezel on the bezel retention tab.
Rotate the top of the bezel toward the JCS 1200 platform until the bezel clicks
into place.
Turn the quarter-turn bezel locks to the locked position.
Preventing Electrostatic Discharge Damage to the JCS 1200 Platform on page 154
Removing a JCS 1200 Bezel Collar on page 100
Installing a JCS 1200 Bezel Collar on page 102
Chapter 10: Replacing Components in a JCS 1200 Platform
Replacing a JCS 1200 Bezel Collar
99