JCS 1200 Switch Module Overview
Topics include:
JCS 1200 Switch Module Description
Figure 16 on page 27 shows the JCS 1200 switch module.
Figure 16: JCS 1200 Switch Module
The JCS 1200 platform supports two hot-swappable switch module bays (see "JCS 1200
Hardware Overview" on page 4 for the location of the switch module bays). You
must install a switch module interposer into the bay before you install a switch
module into the JCS 1200 platform.
NOTE: High-speed switch modules are not supported.
Related Topics
JCS 1200 Switch Module Components and LEDs
Figure 17 on page 28 shows the components on the switch module.
JCS 1200 Switch Module Description on page 27
JCS 1200 Switch Module Components and LEDs on page 27
JCS 1200 Switch Module Components and LEDs on page 27
Replacing a JCS 1200 Switch Module Filler Tray on page 145
Replacing a JCS 1200 Switch Module Interposer on page 146
Replacing a JCS 1200 Switch Module or Module Filler on page 143
Locating the JCS 1200 Switch Module Serial Number on page 205
Chapter 2: Hardware Component Overview
JCS 1200 Switch Module Overview
27