Table 4: Junos Software Network Operations Guides - Juniper JCS 1200 Hardware Manual

Juniper Control System (JCS) 1200 Platform Hardware Guide
Table 3: Technical Documentation for Supported Routing Platforms (continued)
Book
Advanced WAN Access Configuration Guide
Administration Guide
Release Notes
JUNOS Release Notes
Hardware Release Notes
JUNOScope Release Notes
AIS Release Notes
AIS AI-Scripts Release Notes
J-series Services Router Release Notes

Table 4: JUNOS Software Network Operations Guides

Book
Baseline
Interfaces
xxviii
List of Technical Publications
Description
Explains how to configure J-series Services Routers in virtual private
networks (VPNs) and multicast networks, configure data link
switching (DLSw) services, and apply routing techniques such as
policies, stateless and stateful firewall filters, IP Security (IPsec)
tunnels, and class-of-service (CoS) classification for safer, more
efficient routing.
Shows how to manage users and operations, monitor network
performance, upgrade software, and diagnose common problems
on J-series Services Routers.
Summarize new features and known problems for a particular
software release, provide corrections and updates to published
JUNOS, JUNOScript, and NETCONF manuals, provide information
that might have been omitted from the manuals, and describe
upgrade and downgrade procedures.
Describe the available documentation for the routing platform and
summarize known problems with the hardware and accompanying
software. Each platform has its own release notes.
Contain corrections and updates to the published JUNOScope
manual, provide information that might have been omitted from
the manual, and describe upgrade and downgrade procedures.
Summarize AIS new features and guidelines, identify known and
resolved problems, provide information that might have been
omitted from the manuals, and provide initial setup, upgrade, and
downgrade procedures.
Summarize AI-Scripts new features, identify known and resolved
problems, provide information that might have been omitted from
the manuals, and provide instructions for automatic and manual
installation, including deleting and rolling back.
Briefly describe Services Router features, identify known hardware
problems, and provide upgrade and downgrade instructions.
Description
Describes the most basic tasks for running a network using Juniper
Networks products. Tasks include upgrading and reinstalling JUNOS
software, gathering basic system management information,
verifying your network topology, and searching log messages.
Describes tasks for monitoring interfaces. Tasks include using
loopback testing and locating alarms.