Juniper JCS 1200 Hardware Manual page 25

Table 3: Technical Documentation for Supported Routing Platforms (continued)
Book
High Availability
MPLS Applications
Multicast Protocols
Multiplay Solutions
MX-series Layer 2 Configuration Guide
MX-series Layer 2 Solutions Guide
Network Interfaces
Network Management
Policy Framework
Protected System Domain
Routing Protocols
Secure Configuration Guide for Common Criteria
and JUNOS-FIPS
Description
Provides an overview of hardware and software resources that
ensure a high level of continuous routing platform operation and
describes how to configure high availability (HA) features such as
nonstop active routing (NSR) and graceful Routing Engine
switchover (GRES).
Provides an overview of traffic engineering concepts and describes
how to configure traffic engineering protocols.
Provides an overview of multicast concepts and describes how to
configure multicast routing protocols.
Describes how you can deploy IPTV and voice over IP (VoIP)
services in your network.
Provides an overview of the Layer 2 functions of the MX-series
routers, including configuring bridging domains, MAC address and
VLAN learning and forwarding, and spanning-tree protocols. It also
details the routing instance types used by Layer 2 applications. All
of this material was formerly covered in the JUNOS Routing Protocols
Configuration Guide.
Describes common configuration scenarios for the Layer 2 features
supported on the MX-series routers, including basic bridged VLANs
with normalized VLAN tags, aggregated Ethernet links, bridge
domains, Multiple Spanning Tree Protocol (MSTP), and integrated
routing and bridging (IRB).
Provides an overview of the network interface functions of the
JUNOS software and describes how to configure the network
interfaces on the routing platform.
Provides an overview of network management concepts and
describes how to configure various network management features,
such as SNMP and accounting options.
Provides an overview of policy concepts and describes how to
configure routing policy, firewall filters, and forwarding options.
Provides an overview of the JCS 1200 platform and the concept of
Protected System Domains (PSDs). The JCS 1200 platform, which
contains up to six redundant pairs of Routing Engines running
JUNOS software, is connected to a T320 router or to a T640 or
T1600 routing node. To configure a PSD, you assign any number
of Flexible PIC concentrators (FPCs) in the T-series routing platform
to a pair of Routing Engines on the JCS 1200 platform. Each PSD
has the same capabilities and functionality as a physical router,
with its own control plane, forwarding plane, and administration.
Provides an overview of routing concepts and describes how to
configure routing instances, and unicast routing protocols.
Provides an overview of secure Common Criteria and JUNOS-FIPS
protocols for the JUNOS software and describes how to install and
configure secure Common Criteria and JUNOS-FIPS on a routing
platform.
About This Guide
List of Technical Publications
xxv