Jcs 1200 General Safety Guidelines And Warnings - Juniper JCS 1200 Hardware Manual

JCS 1200 General Safety Guidelines and Warnings

The following guidelines help ensure your safety and protect the platform from
damage. The list of guidelines might not address all potentially hazardous situations
in your working environment, so be alert and exercise good judgment at all times.
General Safety Guidelines and Warnings for the JCS 1200 Platform
The general safety guidelines and warnings help ensure your safety and protect the
routing platform from damage. The list of guidelines might not address all potentially
hazardous situations in your working environment, so be alert and exercise good
judgment at all times.
JCS 1200 Electrical Safety Guidelines and Warnings on page 169
JCS 1200 Agency Approvals and Compliance Statements on page 181
General Safety Guidelines and Warnings for the JCS 1200 Platform on page 151
Qualified Personnel Warning for the JCS 1200 Platform on page 152
Restricted Access Area Warning for the JCS 1200 Platform on page 152
Preventing Electrostatic Discharge Damage to the JCS 1200 Platform on page 154
Perform only the procedures explicitly described in this manual. Make sure that
only authorized service personnel perform other system services.
Keep the area around the chassis clear and free from dust before, during, and
after installation.
Keep tools away from areas where people could trip over them while walking.
Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which
could become caught in the chassis.
Wear safety glasses if you are working under any conditions that could be
hazardous to your eyes.
Do not perform any actions that create a potential hazard to people or make the
equipment unsafe.
Never attempt to lift an object that is too heavy for one person to handle.
Never install or manipulate wiring during electrical storms.
Never install electrical jacks in wet locations unless the jacks are specifically
designed for wet environments.
Operate the routing platform only when it is properly grounded.
Replace fuses only with fuses of the same type and rating. (Applies only to the
M320 and T320 routers.)
Do not open or remove chassis covers or sheet metal parts unless instructions
are provided in this manual. Such an action could cause severe electrical shock.
Do not push or force any objects through any opening in the chassis frame. Such
an action could result in electrical shock or fire.
General Safety Guidelines and Warnings for the JCS 1200 Platform
Appendix A: Safety and Regulatory Compliance Information
151