Replacing A Jcs 1200 Network Clock Filler; Removing A Jcs 1200 Network Clock Filler; Installing A Jcs 1200 Network Clock Filler; Figure 69: Removing And Installing A Jcs 1200 Mux Card - Juniper JCS 1200 Hardware Manual

Juniper Control System (JCS) 1200 Platform Hardware Guide

Figure 69: Removing and Installing a JCS 1200 MUX Card

To install a MUX card (see Figure 69 on page 132):
1.
2.
3.
4.
Related Topics

Replacing a JCS 1200 Network Clock Filler

Topics include:

Removing a JCS 1200 Network Clock Filler

Figure 70 on page 133 shows how to remove and install a network clock filler.
132
Replacing a JCS 1200 Network Clock Filler
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and
connect the strap to one of the ESD points on the chassis.
Make sure that the release handle on the MUX card is in the open position.
Slide the MUX card into the bay until it stops.
Push the release handle to the closed position.
Preventing Electrostatic Discharge Damage to the JCS 1200 Platform on page 154
JCS 1200 MUX Card LEDs on page 21
Locating the JCS 1200 MUX Card Serial Number on page 201
Removing a JCS 1200 Network Clock Filler on page 132
Installing a JCS 1200 Network Clock Filler on page 133