Figure 95: User Label Locations On The Jcs 1200 Platform - Juniper JCS 1200 Hardware Manual

Juniper Control System (JCS) 1200 Platform Hardware Guide
To display the Routing Engine serial number, enter the
(where x is a value of 1 through 12 for each Routing Engine) from the management
module CLI.
The Routing Engine serial number is located in the
shown in the following sample output:
system> info -T blade[1]
UUID: DB39 735D 4512 319C BD74 4CC4 9376 DA98
Manufacturer: Not Available (Not Available)
Manufacturer ID: 20301
Product code: System Enclosure/JCS1200 Chassis/
Serial number: Not Available
Part no.: 740-023156
Component serial no.: JCS-CHASSIS-SN-BCG001
CLEI: Not Available
AMM slots: 2
Blade slots: 12
I/O Module slots: 10
Power Module slots: 4
Blower slots: 4
Media Tray slots: 2
A set of blank labels comes with each Routing Engine (see Figure 95 on page 204).
Record identifying information on a label, and place it on the JCS 1200 platform top
bezel, just above the Routing Engine. Do not place the label on the Routing Engine
itself or in any way block the ventilation holes on the Routing Engine.

Figure 95: User Label Locations on the JCS 1200 Platform

Related Topics
204
Locating the JCS 1200 Routing Engine Serial Number
Powering Off a JCS 1200 Routing Engine on page 74
Replacing a JCS 1200 Routing Engine on page 140
Contacting Customer Support on page 206
command
info -T blade[x]
Component serial no. field as