Replacing A Jcs 1200 Fan Shuttle; Removing A Jcs 1200 Fan Shuttle; Installing A Jcs 1200 Fan Shuttle; Figure 59: Removing And Installing A Jcs 1200 Fan Pack - Juniper JCS 1200 Hardware Manual

5.
6.
Installing a JCS 1200 Fan Pack
Figure 59 on page 121 shows how to remove and install a fan pack.

Figure 59: Removing and Installing a JCS 1200 Fan Pack

To install a fan pack on a power module (see Figure 59 on page 121):
1.
2.
3.
4.
5.
Related Topics

Replacing a JCS 1200 Fan Shuttle

Topics include:
Pull the fan pack away from the power module.
If you are instructed to return the fan pack, follow all packaging instructions and
use any packaging materials for shipping that are supplied to you.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and
connect the strap to one of the ESD points on the chassis.
Make sure that the handle is rotated down so that it is parallel with the bottom
of the module, with the power module rear connector facing up.
Slide the fan pack into position on the power module until it stops and locks into
place.
Rotate the power module handle to the open position.
Install the power module.
Preventing Electrostatic Discharge Damage to the JCS 1200 Platform on page 154
Removing a JCS 1200 Fan Shuttle on page 122
Installing a JCS 1200 Fan Shuttle on page 123
Chapter 10: Replacing Components in a JCS 1200 Platform
Installing a JCS 1200 Fan Pack
121