Jcs 1200 General Electrical Safety Guidelines And Warnings - Juniper JCS 1200 Hardware Manual

Juniper Control System (JCS) 1200 Platform Hardware Guide

JCS 1200 General Electrical Safety Guidelines and Warnings

Topics include:
General Electrical Safety Guidelines and Warnings Electrical Codes for the JCS 1200
Platform
Many routing platform components can be removed and replaced without powering
off or disconnecting power to the routing platform, as detailed in "JCS 1200 Hardware
Component Installation Guidelines" on page 95. Never install equipment if it appears
damaged.
Related Topics
170
General Electrical Safety Guidelines and Warnings Electrical Codes for the JCS 1200 Platform
General Electrical Safety Guidelines and Warnings Electrical Codes for the
JCS 1200 Platform on page 170
Grounded Equipment Warning for the JCS 1200 Platform on page 171
Midplane Energy Hazard Warning for the JCS 1200 Platform on page 172
Multiple Power Supplies Disconnection Warning for the JCS 1200
Platform on page 172
TN Power Warning for the JCS 1200 Platform on page 173
Copper Conductors Warning for the JCS 1200 Platform on page 174
Install the routing platform in compliance with the following local, national, or
international electrical codes:
United States—National Fire Protection Association (NFPA 70), United States
National Electrical Code.
Canada—Canadian Electrical Code, Part 1, CSA C22.1.
Other countries—International Electromechanical Commission (IEC) 60364,
Part 1 through Part 7.
Evaluated to the TN power system.
Locate the emergency power-off switch for the room in which you are working
so that if an electrical accident occurs, you can quickly turn off the power.
Do not work alone if potentially hazardous conditions exist anywhere in your
workspace.
Never assume that power is disconnected from a circuit. Always check the circuit
before starting to work.
Carefully look for possible hazards in your work area, such as moist floors,
ungrounded power extension cords, and missing safety grounds.
Operate the routing platform within marked electrical ratings and product usage
instructions.
For the routing platform and peripheral equipment to function safely and
correctly, use the cables and connectors specified for the attached peripheral
equipment, and make certain they are in good condition.
Grounded Equipment Warning for the JCS 1200 Platform on page 171
Midplane Energy Hazard Warning for the JCS 1200 Platform on page 172