Tools Required To Install The Jcs 1200 Platform Using A Mechanical Lift - Juniper JCS 1200 Hardware Manual

Installing the JCS 1200 Platform Using a Mechanical Lift
Because of the JCS 1200 platform's size and weight—up to 350 lb (158.8 kg)
depending on the configuration—we strongly recommend that you install the JCS 1200
platform using a mechanical lift. If you do not use a lift to install the JCS 1200
platform, see "Lifting the JCS 1200 Platform into the Rack or Cabinet" on page 56
for complete instructions to safely install the platform.
Before installing the JCS 1200 platform, you should have prepared your site and
reviewed the guidelines in "Overview of Preparing the Site for JCS 1200 Platform
Installation" on page 33. The "Site Preparation Checklist for the JCS 1200
Platform" on page 33 summarizes the tasks you need to perform when preparing a
site for platform installation. You also need to unpack the JCS 1200 platform from
the shipping container, as described in "Unpacking the JCS 1200
Platform" on page 40.
Topics include:

Tools Required to Install the JCS 1200 Platform Using a Mechanical Lift

To install the platform, you need the following tools:
Related Topics
Installing the JCS 1200 Platform Using a Lift
Before installing the JCS 1200 platform in the rack:
Tools Required to Install the JCS 1200 Platform Using a Mechanical Lift on page 51
Installing the JCS 1200 Platform Using a Lift on page 51
Mechanical lift
Phillips (+) screwdriver, number 2
ESD grounding wrist strap
Installing the JCS 1200 Mounting Hardware for a Four-Post Rack or
Cabinet on page 44
Installing the JCS 1200 Mounting Hardware for an Open-Frame Rack on page 46
Installing the JCS 1200 Platform Using a Lift on page 51
Read the safety information in "JCS 1200 Chassis Lifting Guidelines" on page 155.
Remove the JCS 1200 platform from the shipping container, as described in
"Unpacking the JCS 1200 Platform" on page 40.
Install the mounting hardware, as described in "Installing the JCS 1200 Mounting
Hardware for a Four-Post Rack or Cabinet" on page 44 or "Installing the JCS 1200
Mounting Hardware for an Open-Frame Rack" on page 46.
Installing the JCS 1200 Platform Using a Mechanical Lift
Chapter 6: Installing the JCS 1200 Platform
51