Installing The Jcs 1200 Platform In A Rack Without A Lift; Figure 24: Installing The Jcs 1200 Platform In An Open-Frame Rack - Juniper JCS 1200 Hardware Manual

Juniper Control System (JCS) 1200 Platform Hardware Guide

Figure 24: Installing the JCS 1200 Platform in an Open-Frame Rack

Related Topics

Installing the JCS 1200 Platform in a Rack Without a Lift

Because of the JCS 1200 platform's size and weight—up to 350 lb (158.8 kg)
depending on the configuration—we strongly recommend that you install the JCS 1200
platform using a mechanical lift, as described in "Installing the JCS 1200 Platform
Using a Lift" on page 51. If you do not use a lift to install the platform, refer to the
following procedures:
54
Installing the JCS 1200 Platform in a Rack Without a Lift
Tools Required to Install the JCS 1200 Platform Using a Mechanical Lift on page 51
Tools and Parts Required to Install the JCS 1200 Platform Without a Mechanical
Lift on page 55
Removing Components from the JCS 1200 Platform on page 55
Lifting the JCS 1200 Platform into the Rack or Cabinet on page 56
Reinstalling Components into the JCS 1200 Platform on page 57