Suzuki WagonR+ RB310 Service Manual page 2056

Engine oil capacity
Oil pan capacity
(6.5/5.5 US/Imp pt.)
Oil filter capacity
(0.4/0.3 US/Imp pt.)
Others
(0.6/0.5 US/Imp pt.)
Total
(7.5/6.3 US/Imp pt.)
3) Loosen oil filter (1) by using oil filter wrench (Special tool).
4) Apply engine oil to new oil filter "O" ring.
5) Screw new filter on oil filter stand by hand until filter "O" ring con-
6) Tighten filter 3/4 turn from the point of contact with mounting sur-
3 / 4 turn
7) Replenish oil until oil level is brought to FULL level mark (1) on
8) Start engine and run it for three minutes. Stop it and wait another
1. Full level mark (hole)
2. Low level mark (hole)
about 3.1 liters
about 0.2 liters
about 0.3 liters
9) Check oil filter and drain plug for oil leakage.
about 3.6 liters
Special Tool
(A): 09915-47330
tacts mounting surface.
CAUTION:
To tighten oil filter properly, it is important to accurately
identify the position at which filter "O" ring first contacts
mounting surface.
face using an oil filter wrench.
Special Tool
(A): 09915-47330
Tightening Torque
.
(a): 14 N m (1.4 kg-m, 10.5 lb-ft)
dipstick (Oil pan and oil filter capacity). Filler inlet is at the top of
cylinder head cover.
5 minutes before checking oil level. Add oil, as necessary, to
bring oil level to FULL level mark on dipstick.
NOTE:
Engine oil capacity is specified as left table.
However, note that amount of oil required when actually
changing oil may somewhat differ from data in left table de-
pending on various conditions (temperature, viscosity,
etc.).
MAINTENANCE AND LUBRICATION 0B-7