Renault Laguna III Manual page 3619

B-pillar upper trim: Removal - Refitting
D91
Essential special tooling
Car. 1363 Set of trim removal levers.
Tightening torquesm
front side seat belt
return mechanism bolt
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Remove:
- the front door sill lining (see 71A, Body internal
trim, Front door sill lining: Removal - Refitting,
page 71A-12) ,
- the side section (see Side section: Removal - Re-
fitting) ,
- the rear bench seat base (see 76A, Rear seat fra-
mes and mechanisms, Rear bench seat base:
Removal - Refitting, page 76A-3) ,
- the rear quarter panel trim (see 71A, Body inter-
nal trim, Rear quarter panel trim: Removal - Re-
fitting, page 71A-27) ,
- the rear panel trim (see 71A, Body internal trim,
Rear panel trim: Removal - Refitting, page 71A-
31) .
a Remove the trim (1) from the front side seat belt re-
turn mechanism using the tool (Car. 1363).
BODY INTERNAL TRIM
21 N.m
133965
a Remove the bolt from the front side seat belt return
mechanism (2) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a
Note:
When removing the B-pillar upper trim, take care
not to deform the headlining in that area.
71A-23
71A
133967