Chrysler 1997 Stratus Convertible RHD Service Manual page 603

JX
DESCRIPTION AND OPERATION
HAZARD FLASHERS . . . . . . . . . . . . . . . . . . . . . . 5
DESCRIPTION AND OPERATION
TURN SIGNALS
Power for the turn signals flows from the Power
Distribution Center (PDC) to the ignition switch on
circuit A1. The A1 circuit is protected by a 20 amp
fuse located in cavity 8 of the PDC. With the key in
the ACCESSORY or RUN position, the ignition
switch connects voltage from the A1 circuit to the
A31 circuit.
Circuit A31 connects to the junction block and pow-
ers fuse 15. This is a 10 amp fuse. From the fuse, cir-
cuit F13 supplies voltage to the combination flasher.
The F13 circuit also supplies power to the windshield
wipers and the rear window defogger relay.
Circuit A15 also supplies voltage to the combina-
tion flasher. This circuit is HOT at all times and is
protected by a 20 amp fuse located in cavity 6 of the
PDC.
The L32 circuit connects between the combination
flasher and the turn signal portion of the multi-func-
tion switch. Circuit L32 connects to a BUS bar inter-
nal to the switch that powers the turn signals and
the hazard flasher.
RIGHT TURN SIGNAL
When the operator selects the right turn signal,
the multi-function switch connects power from circuit
L32 to circuit L60. Circuit L60 supplies power for the
front lamp and provides an input to the combined
rear lighting module and side repeater lamp. This
circuit also splices and supplies power to the instru-
ment cluster indicator lamp.
Circuit L62 connects from the combined rear light-
ing module to the right rear lamps.
Ground for the rear lamp is provided on circuit Z1
and terminates at the left rear wheel well. The
ground for the front lamp is provided on circuit Z1
and terminates at the right frame rail.
LEFT TURN SIGNAL
When the operator selects the left turn signal, the
multi-function switch connects power from circuit
L32 to circuit L61. Circuit L61 supplies power for the
front lamp and also provides an input to the com-
bined rear lighting module and side repeater lamp.
8W - 52 TURN SIGNALS
8W-52 TURN SIGNALS
INDEX
page
TURN SIGNALS . . . . . . . . . . . . . . . . . . . . . . . . . . 5
This circuit also splices and supplies power to the
instrument cluster indicator lamp.
Circuit L63 connects from the combined rear light-
ing module to the left rear lamps.
Ground for the rear lamp is provided on circuit Z1
and terminates at the left rear wheel well. The
ground for the front lamp is provided on circuit Z1
and terminates at the left strut tower.
HELPFUL INFORMATION
• Check the 20 amp fuses located in cavities 6,
and 8 of the PDC
• Check the 10 amp fuse located in cavity 15 of
the junction block
• For the left front turn signal lamp check the
grounding point at the left strut tower
• For the right front turn signal lamp check the
grounding point at the right frame rail
• For the left and right rear turn signal lamps
check the grounding point at the left rear wheel well.
HAZARD FLASHERS
Power for the hazard flashers flows from the Power
Distribution Center (PDC) to the ignition switch on
circuit A1. The A1 circuit is protected by a 20 amp
fuse located in cavity 8 of the PDC. With the key in
the ACCESSORY or RUN position, the ignition
switch connects voltage from the A1 circuit to the
A31 circuit.
Circuit A31 connects to the junction block and pow-
ers fuse 15. This is a 10 amp fuse. From the fuse, cir-
cuit F13 supplies voltage to the combination flasher.
The F13 circuit also supplies power to the windshield
wipers and the rear window defogger relay.
Circuit A15 also supplies voltage to the combina-
tion flasher. This circuit is HOT at all times and is
protected by a 20 amp fuse located in cavity 6 of the
PDC.
The L32 circuit connects between the combination
flasher and the BUS bar that powers the turn signals
and the hazard flasher internal to the switch.
When the hazard flashers are ON the multi-func-
tion switch connects circuit L32 to circuits L60 and
L61. It also connects circuits L91 and Z1. Circuit Z1
is the ground path for the combination flasher and
terminates at the instrument panel left side cowl.
8W - 52 - 5
page