Chrysler 1997 Stratus Convertible RHD Service Manual page 1003

DO NOT SCRATCH REAR SCREWDRIVER CLUTCH PLATE TIFY PACKS TO ASSURE CAUTION: TAG AND IDEN- ORIGINAL PLACEMENT. COVER BOLTS
CLUTCH PLATES (5)
JX
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 108 Low/Reverse Reaction Plate Snap Ring
Fig. 109 Low/Reverse Clutch Pack
NOTE: Tag low/reverse clutch pack for reassembly
identification.
Fig. 110 Rear Cover Bolts
LOW/REVERSE REACTION PLATE FLAT CLUTCH DISCS (5) REAR COVER
SNAP RING
TRANSFER SHAFT GEAR TRANSFER S HAFT SPECIAL NUT TOOL 6259 REAR COVER LOCK WASHER
Fig. 111 Rear Cover
Fig. 112 Remove Transfer Shaft Gear Nut
Fig. 113 Transfer Shaft Gear Nut and Washer
CONE RUBBER ADHESIVE SEAL- 1/8 INCH BEAD OF MOPAR SILI- ANT AS SHOWN OUTPUT GEAR
TRANSAXLE 21 - 35