Chrysler 1997 Stratus Convertible RHD Service Manual page 1019

OD/REVERSE O-RING INPUT SHAFT INPUT SHAFT TON PIS- O-RINGS RETURNSPRING
JX
DISASSEMBLY AND ASSEMBLY (Continued)
ASSEMBLY
Use petrolatum on all seals to ease
assembly of components.
Fig. 199 Install Input Shaft
Fig. 200 Install Input Shaft Snap Ring
Fig. 201 Return Spring and Snap Ring
PUSH DOWN TO INSTALL OVERDRIVE/RE-
SCRATCH SCREWDRIVER (DO NOT ARBOR PRESS RAM INPUT SNAP RING SHAFT SNAP RING ASSEMBLY LIP SEALS SURFACE) BEARING HUB VERSE OD/RE- PISTON TO REMOVE OR INSTALL SPRING ARBOR (COMPRESS
BLY INPUT SHAFT HUB ASSEM- PUSH DOWN TO INSTALL
NOTE: The OD/UD Reaction Plate, Snap Rings, and
Input Clutches Retainer is not interchangeable with
previous year 41TE components. The snap rings
are thicker and the position of the ring lands have
changed.
SPECIAL TOOL 6057 JUST PRESS SNAP RING) ENOUGH RETURN RAM
VERSE PISTON
Fig. 202 Install Snap Ring
Fig. 203 Install OD/Reverse Piston
(ROTATE TO SPLINES) ALIGN
Fig. 204 Install Input Shaft Hub Assembly
INPUT CLUTCHES RETAINER
SNAP RING SCREW- DRIVER RETURNSPRING
TRANSAXLE 21 - 51
OD/REV. PISTON