Chrysler 1997 Stratus Convertible RHD Service Manual page 271

LOCK RETAINING TAB CYLINDER
JX
REMOVAL AND INSTALLATION (Continued)
(11) Remove screws holding multi-function switch
to lock housing (Fig. 61).
Fig. 61 Multi-Function Switch Removal/Installation
(12) Place key cylinder in RUN position. Depress
lock cylinder retaining tab and remove key cylinder
(Fig. 62).
Fig. 62 Lock Cylinder Removal
ATTACHING SCREWS MULTI-FUNCTION SCREW- DRIVER SWITCH
IGNITION SWITCH
MULTI-FUNCTION IGNITION SWITCH SWITCH ATTACHING/GROUNDING
IGNITION SWITCH
(13) Disconnect electrical connectors from ignition
switch (Fig. 63) and (Fig. 64).
Fig. 63 Ignition Switch
Fig. 64 Ignition Switch Connectors
(14) Remove ignition switch mounting screw (Fig.
63) with a #10 Torx tamper proof bit.
(15) Depress retaining tabs (Fig. 53) and pull igni-
tion switch from steering column.
IGNITION SYSTEM
KEY IN SWITCH SCREW PRNDL SWITCH LOCK HOUSING
8D - 25