Chrysler 1997 Stratus Convertible RHD Service Manual page 1021

ONE UNDERDRIVE CLUTCH REACTION UNDERDRIVE (STEP SIDE DOWN) REACTION OD/UD CLUTCH PLATE PLATE SNAP RING CLUTCH DISC FLAT
JX
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 211 UD Clutch Flat Snap Ring
Fig. 212 Install Last UD Clutch Disc
Fig. 213 OD/UD Reaction Plate
SCREWDRIVER CAUTION: TAPERED SNAP NOT OVERDRIVE/UNDERDRIVE CLUTCHES PLATE TAPERED REUSE RING
CLUTCH PACK WITH COMPRESS FINGER TO ZERO USE CAUTION: DO NOT DIAL INDICATOR REACTION PLATE OVERDRIVE/UNDERDRIVE REACTION PLATE TAPERED SNAP RING PROPER SELECT REACTION PLATE FOR DIAL INDICATOR KIT C-3339 SCRATCH
NOTE: Snap ring ends must be located within one
finger of the input clutch hub. Be sure that snap
ring is fully seated, by pushing with screwdriver,
into snap ring groove all the way around.
Fig. 216 Set Up Dial Indicator for Clutch Clearance
DO REACTION SNAP RING
TRANSAXLE
Fig. 214 Tapered Snap Ring
UNDERDRIVE CLEARANCE CLUTCH CLUTCHES
Fig. 215 Seating Tapered Snap Ring
NOT SCRATCH REAC- SCREWDRIVER TION PLATE) (DO
21 - 53
SCREW- DRIVER STEEL BAR