Chrysler 1997 Stratus Convertible RHD Service Manual page 989

TRANSMISSION SCREWDRIVER VALVE BODY VALVE BODY SENSOR RANGE
PARK SPRAG
GUIDE
BRACKET
JX
REMOVAL AND INSTALLATION (Continued)
Fig. 38 Push Park Rod Rollers from Guide Bracket
Fig. 39 Remove Valve Body
Fig. 40 Valve Body Removed
guide bracket, while shifting manual lever assembly
out of the installation position.
PARK SPRAG
ROLLERS
TRANSMISSION
CONTROL MODULE
TRANSAXLE
REMOVAL
Transaxle removal does NOT require engine
removal.
The transaxle and torque converter must be
removed as an assembly; otherwise, the torque con-
verter drive plate, pump bushing or oil seal may be
damaged. The drive plate will not support a load;
therefore, none of the weight of the transaxle should
be allowed to rest on the drive plate during removal.
(1) Disconnect battery negative cable at left strut
tower (Fig. 41).
Fig. 41 Negative Cable
(2) Remove air cleaner duct.
(3) Remove transmission control module (TCM)
and wiring (Fig. 42).
Fig. 42 Transmission Control Module
TRANSAXLE 21 - 21