Chrysler 1997 Stratus Convertible RHD Service Manual page 986

SOCKET SOUND COVER ATTACHING PLATE SOUND 8-WAY WRENCH SOLENOID ATTACHING PLATE ASSEMBLY NECTOR CON- COVER
21 - 18 TRANSAXLE
REMOVAL AND INSTALLATION (Continued)
Fig. 25 Attaching Screws
Fig. 26 Solenoid Assembly
TRANSMISSION RANGE SENSOR
The transmission range sensor is located within
the transaxle. To remove the TRS the transaxle oil
pan and valve body must be removed.
REMOVAL
(1) Disconnect battery negative cable.
(2) Remove engine air cleaner and tube.
(3) Remove gearshift cable.
(4) Remove manual valve lever.
(5) Disconnect transmission range sensor connec-
tor.
(6) Hoist vehicle.
(7) Carefully remove transaxle oil pan and drain
fluid.
(8) Remove transaxle oil filter. Let transaxle oil
drain fully.
(9) Remove valve body retaining bolts.
(10) Extract park rod from guide bracket and
remove valve body from transaxle.
(11) Place valve body on workbench (Fig. 27).
SOLENOID ASSEMBLY GAS- ATTACHING KETS SCREWS TRANSMISSION
(12) Remove TRS retaining screw (Fig. 28).
(13) Remove manual shaft seal (Fig. 29).
(14) Slide Transmission Range Sensor up the man-
ual shaft and remove (Fig. 30).
MANUAL SHAFT RETAINING TRS
RANGE TRANSMISSION TRS RETAINING SEN- SOR SCREW
RANGE SENSOR MANUAL SHAFT SEAL
Fig. 27 Valve Body W/TRS
SCREW MANUAL SHAFT SEAL
Fig. 28 Remove Retaining Screw
Fig. 29 Remove Manual Shaft Seal
VALVE BODY
JX