Chrysler 1997 Stratus Convertible RHD Service Manual page 348

FLOOR FLOOR CONSOLE CONSOLE FLOOR CONSOLE FLOOR CONSOLE TESY LAMP TESY LAMP COUR- COUR- BULB
8L - 10 LAMPS
REMOVAL AND INSTALLATION (Continued)
Fig. 4 Floor Console Courtesy Lamp
Fig. 5 Floor Console Courtesy Lamp Bulb
DOOR COURTESY LAMP BULB
REMOVAL
(1) Using a small, flat bladed tool inserted into
rear edge of door courtesy lamp lens, remove lens.
(2) Pull courtesy lamp bulb from bulb socket (Fig.
6).
INSTALLATION
(1) Push courtesy lamp bulb into bulb socket.
(2) Insert front edge of courtesy lamp lens to lamp
housing.
(3) Snap lamp lens into lamp housing.
TAIL/STOP AND TURN SIGNAL LAMP BULB
REMOVAL
(1) Release trunk latch and open trunk lid.
(2) Remove trunk lining as necessary to gain
access to tail lamp nuts.
(3) Remove plastic nuts holding tail lamp to rear
closure panel.
TAIL, STOP, TURN SIGNAL COURTESY LAMP HOUSING REAR CLOSURE PANEL DOOR TRIM PANEL LAMP BULB BULB
Fig. 6 Door Courtesy Lamp Bulb
(4) Separate lamp from opening in quarter panel.
(5) Rotate socket counterclockwise one quarter
turn.
(6) Pull socket from back of lamp (Fig. 7).
(7) Pull bulb from socket.
Fig. 7 Tail, Stop, and Turn Signal Lamp Bulb
INSTALLATION
(1) Push bulb into socket.
(2) Push socket into back of lamp.
(3) Rotate socket clockwise one quarter turn.
(4) Position lamp to opening in quarter panel.
(5) Install plastic nuts holding tail lamp to rear
closure panel.
(6) Install trunk lining.
BACK-UP LAMP BULB
REMOVAL
(1) Release trunk latch and open trunk lid.
(2) Remove trunk lining as necessary to gain
access to tail lamp nuts.
JX