Chrysler 1997 Stratus Convertible RHD Service Manual page 1107

OUTER DOOR PANEL A PILLAR HEADER
DOOR OUTER BELT WEATH- A-PILLAR WEATHERSTRIP RETAINER ERSTRIP
JX
REMOVAL AND INSTALLATION (Continued)
(3) Separate outer belt weatherstrip from the vehi-
cle.
Fig. 37 Door Outer Belt Weatherstrip
INSTALLATION
(1) Position outer belt weatherstrip on vehicle.
(2) Install screws to hold outer weatherstrip to
outer door panel.
(3) Install door glass.
A–PILLAR WEATHERSTRIP RETAINER AND
MOLDING
REMOVAL
(1) Partially raise convertible top.
(2) Remove header and A–pillar weatherstrip as
necessary to gain access.
(3) Remove screws holding A–pillar weatherstrip
retainer to A–pillar (Fig. 38).
(4) Separate retainer from vehicle.
(5) Remove screws holding A-pillar molding to
A-pillar.
(6) Separate A-pillar molding from vehicle.
Fig. 38 A–Pillar Weatherstrip Retainer
INSTALLATION
(1) Clean A–pillar of any seal material residue.
(2) Position A-pillar molding to vehicle.
(3) Install screws to hold A-pillar molding to A-pil-
lar.
HEADER
HEADER WEATHERSTRIP RETAINER
(4) Position A–pillar weatherstrip retainer on
A–pillar.
(5) Install screws holding retainer to A–pillar.
Install middle screw first and then work outward.
(6) Install header and A–pillar weatherstrip.
(7) Lower and secure convertible top.
HEADER WEATHERSTRIP RETAINER/MOLDING
REMOVAL
(1) Partially raise convertible top.
(2) Remove header and A–pillar weatherstrip as
necessary to gain access.
(3) Remove screws holding A–pillar weatherstrip
retainer to header weatherstrip retainer.
(4) Remove screws holding header weatherstrip
retainer to header panel (Fig. 39).
(5) Separate retainer from vehicle.
Fig. 39 Header Weatherstrip Retainer
INSTALLATION
(1) Clean any residual seal material from header
panel.
(2) Position header weatherstrip retainer on vehi-
cle.
(3) Install screws holding retainer to header panel.
Install center screw first and then work outward.
(4) Install screws holding A–pillar weatherstrip
retainer to header retainer.
(5) Install header and A–pillar weatherstrip.
(6) Lower and secure convertible top.
HEADER/A–PILLAR WEATHERSTRIP
REMOVAL
(1) Partially raise convertible top.
(2) Remove inside rear view mirror.
(3) Remove sun visors.
(4) Remove header trim panel.
(5) Remove both door sill trim panels.
BODY 23 - 37