Chrysler 1997 Stratus Convertible RHD Service Manual page 850

E = STRUT REARWARD NUT D = STRUT FORWARD NUT A = RADIATOR INSULATOR B = FENDER FRONT BOLT C = HOOD SLAM BUMPER OUTBOARD INBOARD
13 - 6 BUMPERS AND FRAME
SPECIFICATIONS (Continued)
VEHICLE PREPARATION
Position the vehicle on a level work surface. Using
screw or bottle jacks, adjust the vehicle PLP heights
to the specified dimension above a level work surface.
Vertical dimensions can be taken from the work sur-
face to the locations indicated were applicable (Fig.
3), (Fig. 4), (Fig. 5), (Fig. 6), (Fig. 7), (Fig. 8), (Fig. 9),
(Fig. 10), and (Fig. 11)
Fig. 3 Engine Compartment Top View
JX