Chrysler 1997 Stratus Convertible RHD Service Manual page 229

JX
DIAGNOSIS AND TESTING (Continued)
cable connections. Determine the state-of-charge and
cranking capacity of the battery. Charge or replace
the battery, if required. Refer to Group 8A, Battery
for more information.
• Ignition Switch - Visually inspect the ignition
switch for indications of physical damage and loose
or corroded wire harness connections.
•
Clutch Pedal Position Switch - Visually
inspect the clutch pedal position switch for indica-
tions of physical damage and loose or corroded wire
harness connections.
•
Park/Neutral Position Switch - Visually
inspect the park/neutral position switch for indica-
tions of physical damage and loose or corroded wire
harness connections.
•
Starter Relay - Visually inspect the starter
relay for indications of physical damage and loose or
corroded wire harness connections.
• Starter - Visually inspect the starter for indi-
cations of physical damage and loose or corroded wire
harness connections.
• Starter Solenoid - Visually inspect the starter
solenoid for indications of physical damage and loose
or corroded wire harness connections.
• Wiring - Visually inspect the wire harness for
damage. Repair or replace any faulty wiring, as
required.
STARTING 8B - 5