Chrysler 1997 Stratus Convertible RHD Service Manual page 821

JX
CLEANING AND INSPECTION (Continued)
Fig. 96 Valve Guide Specification
Fig. 97 Valve Guide Height
CYLINDER HEAD COVER
Before installation, clean cylinder head and cover
mating surfaces. Make certain the rails are flat.
AUTO LASH ADJUSTER
The automatic lash adjusters are precision units
installed in machined openings in the valve actuating
ends of the rocker arms. Do not disassemble the auto
lash adjuster.
HYDRAULIC GASKET BRACKET ADJUSTER LASH SPECIAL FILTER
ROCKER ARM
Inspect the rocker arm/hydraulic lash adjuster
assembly for wear or damage (Fig. 98). Replace
assembly as necessary.
Fig. 98 Rocker Arm/Hydraulic Lash
AdjusterAssemblies
OIL FILTER BRACKET
(1) Check the oil filter mounting surface. The sur-
face must be smooth, flat and free of debris or old
pieces of rubber (Fig. 99).
(2) Check bracket for cracks and oil leaks.
Fig. 99 Oil Filter and Bracket
2.5L ENGINE 9 - 85
MD998443 TOOL ROLLER 23 N·m (17 IN. LBS.) ROCKER ARM