Chrysler 1997 Stratus Convertible RHD Service Manual page 896

PLUG CABLES SPARK
14 - 42 FUEL SYSTEM
DIAGNOSIS AND TESTING (Continued)
Fig. 41 Ignition Coil and Spark Plugs
Fig. 42 Distributor Electrical Connectors-Viewed
From Rear of Distributor
(11) Inspect system body grounds for loose or dirty
connections. Refer to Group 8 - Wiring for ground loca-
tions.
(12) Inspect air cleaner filter element. Replace as
necessary. Check air induction system for restrictions.
(13) Check electrical connection at the knock sen-
sor (Fig. 44), 2.4L engines only.
(14) Check electrical connections at the camshaft
position sensor (Fig. 45).
(15) Check electrical connections at the engine
coolant temperature sensor (Fig. 46) or (Fig. 47).
(16) Check electrical connector at Electronic EGR
Transducer. Inspect vacuum and back pressure hoses
at the solenoid and transducer for leaks (Fig. 48) or
(Fig. 49).
DISTRIBUTOR SPARK CONNEC- INSULATOR TORS PLUG SPARK PLUG CABLE IGNITION COILS CAMSHAFT POSITION SEN-
DUTY CYCLE
SOLENOID
Fig. 43 Duty Cycle EVAP Purge Solenoid
Fig. 45 Camshaft Position Sensor—2.4L Engine
(17) Inspect electrical connections at the generator.
Check the generator belt for glazing or damage.
(18) Inspect electrical connector at the crankshaft
position sensor (Fig. 50) or (Fig. 51).
SOR ELECTRICAL CONNECTION DRIVER'S MASTER CYLINDER STARTER MOTOR SIDE
PURGE
Fig. 44 Knock Sensor—2.4L
KNOCK TOWER STRUT SEN- SOR
JX