Chrysler 1997 Stratus Convertible RHD Service Manual page 928

FLOW CONTROL VALVE FIT- POWER STEERING PRES- POWER STEERING PUMP POWER RETURN HOSE ROUTING SURE HOSE STEERING TING ROUTING
19 - 14 STEERING
REMOVAL AND INSTALLATION (Continued)
Fig. 12 2.5 Liter Power Steering Hose Routing
(7) Remove the power steering pressure hose from
the pressure fitting on power steering pump (Fig.
13).
Fig. 13 Power Steering Pump Pressure Fitting
(8) Power steering fluid pressure hose is removed
from the vehicle from the bottom rear of engine com-
partment.
(9) Discard all used O-rings located at ends of
power steering pressure hose fittings.
INSTALL
(1) Install power steering pressure hose in vehicle
from bottom of engine compartment using the
reverse order of removal.
(2) Using a lint free towel, wipe clean all open
power steering hose ends and the power steering
pump and steering gear ports.
CAUTION: The Banjo fitting O-ring is a special
O-ring for this application, do not replace this
O-ring with a standard O-ring of this required size.
ATTACHING BOLTS ROUTING BRACKETS BRACK- ETS BRACKET POWER PRESSURE HOSE STEERING SURE HOSE BANJO FITTING POWER STEERING PRES- SURE HOSE BANJO FITTING POWER STEERING PRES- BANJO BOLT BANJO BOLT O-RING O-RING
(3) Install a new O-ring on the end of the power
steering pressure hose banjo fitting (Fig. 14).
Fig. 14 O-Ring Installed In Banjo Fitting
(4) Install a new O-Ring (Fig. 15) on the Banjo
Bolt of the power steering pressure hose Banjo fit-
ting.
Fig. 15 O-Ring Installed On Banjo Fitting Bolt
(5) Lubricate both O-rings using fresh clean power
steering fluid.
(6) Install the Banjo Bolt into the power steering
pressure hose banjo fitting (Fig. 15)
(7) Attach the power steering pressure hose to the
outlet fitting on the power steering pump (Fig. 13).
Do not tighten the pressure fitting banjo bolt at
this time.
CAUTION: Hoses must remain away from exhaust
system, vehicle components and unfriendly sur-
faces causing possible damage to power steering
hoses.
(8) Correctly route power steering pressure hose
avoiding tight bends or kinking of the hose. Install
JX