Installing The M7I Router; Tools And Parts Required To Install The M7I Router Into A Rack; Installing The M7I Router Into The Rack - Juniper M7I Hardware Manual

CHAPTER 8

Installing the M7i Router

Tools and Parts Required to Install the M7i Router Into a Rack

Related
Documentation

Installing the M7i Router Into the Rack

Copyright © 2010, Juniper Networks, Inc.
Tools and Parts Required to Install the M7i Router Into a Rack on page 47
Installing the M7i Router Into the Rack on page 47
To install the chassis into a rack, you need the following tools and parts:
Phillips (+) screwdriver, number 2
Initially Configuring the M7i Router on page 63
M7i Chassis Description on page 6
M7i Chassis Lifting Guidelines on page 131
CAUTION: Depending on configuration, the chassis weighs between 28.2 lb
(12.8 kg) and 36.5 lb (16.6 kg). Installing it into the rack requires at least one
person to lift and another person to secure the mounting screws.
First, perform the following prerequisite procedures:
Verify that the router site meets the requirements described in "M7i Router Site
Preparation Checklist" on page 35.
Place the rack in its permanent location, allowing adequate clearance for airflow and
maintenance, and secure it to the building structure. For details, see "M7i Router Rack
Requirements" on page 36.
Read the information in "General Safety Guidelines for M Series, MX Series, and T Series
Routers" on page 125 and "General Safety Warnings for M Series, MX Series, and T Series
Routers" on page 126.
47