Removing And Deleting A Filter Policy; Removing A Filter From A Service - Alcatel-Lucent 7705 Configuration Manual

Filter Management Tasks

Removing and Deleting a Filter Policy

Before you can delete a filter, you must remove the filter association from the applied ingress
and egress SAPs, ingress SDPs, and ingress network interfaces.
You can remove a filter policy and then delete it from the following entities:

Removing a Filter from a Service

To remove an IP or MAC filter from a VPLS SAP or VPLS SDP (spoke or mesh), use the
first CLI syntax (below). For a VPRN or IES interface SAP or spoke SDP, use the second
CLI syntax:
CLI Syntax:
CLI Syntax:
320
• Removing a Filter from a Service
• Removing a Filter from a Network Interface
• Removing a Filter from a Ring Port
• Deleting a Filter
config>service# vpls service-id
sap sap-id
spoke-sdp sdp-id:vc-id
mesh-sdp sdp-id:vc-id
config>service# vprn service-id
interface ip-int-name
egress
no filter ip ip-filter-id
ingress
no filter [ip ip-filter-id | mac mac-
filter-id]
ingress
no filter [ip ip-filter-id | mac mac-
filter-id]
ingress
no filter [ip ip-filter-id | mac mac-
filter-id]
sap sap-id
egress
no filter [ip ip-filter-id]
ingress
no filter [ip ip-filter-id]
spoke-sdp sdp-id:vc-id
ingress
no filter
7705 SAR OS Router Configuration Guide