Show Ip Helper Dhcp-Snooping Vlan - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Hide thumbs Also See for OmniSwitch 6250:
Table of Contents

Advertisement

DHCP Relay Commands

show ip helper dhcp-snooping vlan

Displays a list of VLANs that have DHCP Snooping enabled and whether or not MAC address verifica-
tion and Option-82 data insertion is enabled for each VLAN.
show ip helper dhcp-snooping vlan
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
This command only applies if DHCP Snooping is enabled at the VLAN level.
Use the show ip helper command to determine the status of DHCP Snooping at the switch level.
Examples
-> show ip helper dhcp-snooping vlan
VLAN
Opt82
ID
Insertion
------+----------+--------------
50
Enabled
60
Enabled
100
Disabled
200
Enabled
1500
Disabled
output definitions
VLAN ID
MAC Address Verification
Opt-82 Data Insertion
Release History
Release 6.6.1; command was introduced.
OmniSwitch 6250 CLI Reference Guide
MAC Addr
Verification
Enabled
Enabled
Enabled
Disabled
Disabled
The VLAN identification number for the DHCP Snooping VLAN.
Indicates whether or not MAC address verification is enabled for the
VLAN (Enabled or Disabled). Configured through the
dhcp-snooping vlan
Indicates whether or not Option-82 data insertion is enabled for the
VLAN (Enabled or Disabled). Configured through the
dhcp-snooping vlan
November 2009
command.
command.
ip helper
ip helper
page 32-53

Advertisement

Table of Contents
loading

Table of Contents