Policy Condition Multicast Ip - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

policy condition multicast ip

Configures a multicast IP address for a policy condition.
policy condition condition_name multicast ip ip_address [mask netmask]
policy condition condition_name no multicast ip
Syntax Definitions
condition_name
ip_address
netmask
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
If a mask is not specified, the IP address is assumed to be a host address.
•
A multicast IP address and a multicast network group cannot be specified in the same condition.
•
Use the no form of the command to remove a multicast IP address from a condition; however, at least
one classification parameter must be associated with a condition.
Examples
-> policy condition cond4 multicast ip 224.1.1.1
Release History
Release 6.6.1; command was introduced.
Related Commands
policy condition
qos apply
page 39-46
The name of the condition.
The multicast IP address.
Optional. The mask for the multicast IP address.
Creates a policy condition.
Applies configured QoS and policy settings to the current configuration.
OmniSwitch CLI Reference Guide
QoS Policy Commands
November 2009