Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1495

QoS Commands
output definitions (continued)
Drops
L2
L3 Ingress
L3 Egress
IGMP join
Fragments
Bad Fragments
Unknown Fragments
Sent NI messages
Received NI messages
Failed NI messages
Load balanced flows
Reflexive flows
Reflexive correction
Flow lookups
Flow hits
Max PTree nodes
Max Ptree depth
Spoofed Events
Nonspoofed Events
DropServices
Release History
Release 6.6.1; command was introduced.
Related Commands
qos stats reset
OmniSwitch CLI Reference Guide
The number of Layer 2 or Layer 3 flows that were dropped.
The number of Layer 2 events, matches, and drops.
The number of Layer 3 ingress events, matches, and drops.
The number of Layer 3 egress events, matches, and drops
The number of multicast events, matches, and drops.
The number of fragments dropped.
The number of fragments received with an offset of 1.
The number of out-of-order fragments received.
The number of messages sent to network interfaces.
The number of messages received by network interfaces.
The number of failed message attempts to network interfaces.
The number of Server Load Balance flow entries.
The number of reflexive flows.
The number of reflexive flow corrections.
The number of flow table lookups.
The number of flow table lookup hits.
The highest number of nodes in the classifier tree.
The length of the longest path in the classifier tree.
The number of spoofed events.
The number of nonspoofed events.
The number of TCP/UDP flows dropped.
Resets QoS statistic counters to zero.
November 2009 page 38-67