Ipv6 Interface - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

IPv6 Commands

ipv6 interface

Configures an IPv6 interface on a VLAN.
ipv6 interface if_name vlan vid [enable | disable]
[base-reachable-time time]
[ra-send {yes | no}]
[ra-max-interval interval]
[ra-managed-config-flag {true | false}]
[ra-other-config-flag {true | false}]
[ra-reachable-time time]
[ra-retrans-timer time]
[ra-default-lifetime time | no ra-default-lifetime]
[ra-send-mtu] {yes | no}
no ipv6 interface if_name
Syntax Definitions
if_name
vlan
vid
base-reachable-time time
ra-send
ra-max-interval interval
ra-managed-config-flag
ra-other-config-flag
ra-reachable-time time
ra-retrans-timer time
OmniSwitch 6250 CLI Reference Guide
IPv6 interface name.
Creates a VLAN interface.
VLAN ID number.
Base value used to compute the reachable time for neighbors reached
via this interface.
Specifies whether the router advertisements are sent on this interface.
Maximum time, in seconds, allowed between the transmission of unso-
licited multicast router advertisements in this interface. The range is 4 -
1,800.
Value to be placed in the managed address configuration flag field in
router advertisements sent on this interface.
Value to be placed in the other stateful configuration flag in router
advertisements sent on this interface.
Value, in milliseconds, to be placed in the reachable time field in router
advertisements sent on this interface. The range is 0 - 3,600,000. The
special value of zero indicates that this time is unspecified by the router.
Value, in milliseconds, to be placed in the retransmit timer field in
router advertisements sent on this interface. The value zero indicates
that the time is unspecified by the router.
November 2009 page 30-3