Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1083

IP Commands
Examples
-> ip route-map route1 sequence-number 10 match ipv6-nexthop list1
-> no ip route-map route1 sequence-number 10 match ipv6-nexthop list1
-> ip route-map route1 sequence-number 10 match ipv6-nexthop 2001::/64
-> no ip route-map route1 sequence-number 10 match ipv6-nexthop 2001::/64
Release History
Release 6.6.1; command was introduced.
Related Commands
ipv6 access-list
ipv6 access-list address
ip route-map action
show ip route-map
MIB Objects
alaRouteMapTable
alaRouteMapIndex
alaRouteMapSequence
alaRouteMapType
alaRouteMapValue
alaRouteMapRowStatus
OmniSwitch 6250 CLI Reference Guide
Creates an access list for adding multiple IPv6 addresses to route maps.
Adds IPv6 addresses to the specified IPv6 access list.
Creates a route map for redistribution and sets the status of the route
map to permit or deny.
Displays the configured IP route maps.
November 2009 page 29-35