Qos Default Multicast Disposition - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

qos default multicast disposition

Configures the default disposition for multicast flows coming into the switch that do not match any poli-
cies.
qos default multicast disposition {accept | deny | drop}
Syntax Definitions
accept
drop
deny
Defaults
By default, multicast flows that do not match policies are accepted on the switch.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the policy action multicast command to specify the disposition for a particular action associated with
a multicast condition. The disposition for a particular action will override the global setting.
Examples
-> qos default multicast disposition deny
Release History
Release 6.6.1; command was introduced.
Related Commands
policy action disposition
MIB Objects
alaQoSConfigTable
alaQoSConfigDefaultMulticastDisposition
alaQoSConfigAppliedDefaultMulticastDisposition
page 38-16
Specifies that the switch should accept the flow.
Specifies that the switch should silently drop the flow.
Specifies that the switch should drop the flow and issue an ICMP
message indicating the flow was dropped for administrative reasons.
Currently this option will provide the same result as drop; that is, the
flow is silently dropped.
Configures a disposition for a policy action.
OmniSwitch CLI Reference Guide
QoS Commands
November 2009