Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1247

IPv6 Commands
Release History
Release 6.6.1; command was introduced.
Related Commands
ipv6 rip status
ipv6 rip route-tag
ipv6 rip update-interval
ipv6 rip invalid-timer
ipv6 rip invalid-timer
ipv6 rip holddown-timer
ipv6 rip jitter
ipv6 rip triggered-sends
MIB Objects
alaRipngInterfaceTable
alaRipngInterfaceStatus
alaRipngRouteTag
laRipngInvalidTimer
alaRipngGarbageTimer
alaRipngHolddownTimer
alaRipngJitter
alaRipngTriggeredSends
OmniSwitch 6250 CLI Reference Guide
Enables or disables RIPng routing on the switch.
Configures the route tag value for RIP routes generated by the
switch.
Configures the Interval, in seconds, so that RIPng routing updates
are sent out.
Configures the amount of time a route remains active in RIB before
being moved to the "garbage" state.
Configures the RIPng garbage timer value. Routes move into the
garbage collection state because the timer expired or a route update
with an INFINITY metric was received.
Configures the amount of time a route is placed in a holddown state.
Configures an offset value for RIPng updates. This is the maximum
(positive or negative) value that can be used to offset the update
interval.
Configures the behavior of triggered updates.
November 2009 page 30-81