Show Sflow Poller - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

sFlow Commands

show sflow poller

Displays the sflow poller table.
show sflow poller [num]
Syntax Definitions
num
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show sflow poller
Instance Interface
-------------------------------------------
1 2/ 6
1 2/ 7
1 2/ 8
1 2/ 9
1 2/10
output definitions
Instance
Interface
Receiver
Interval
Release History
Release 6.6.1; command was introduced.
OmniSwitch 6250 CLI Reference Guide
Specifies the instance id.
Receiver Interval
1 30
1 30
1 30
1 30
1 30
Instance for the counter poller.
Interface used for the counter poller.
Receiver associated with the counter poller.
The maximum number of seconds between successive samples of the
counters associated with the data source.
November 2009 page 37-15