Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1029

UDLD Commands
output definitions
Slot/Port
UDLD-State
Oper-Mode
Global UDLD Status
Port UDLD Status
Probe Timer
Echo-Wait Timer
Release History
Release 6.6.1; command was introduced.
Related Commands
udld mode
udld probe-timer
udld echo-wait-timer
MIB Objects
alaUdldGlobalStatus
alaUdldPortConfigTable
alaUdldPortConfigUdldOperationalStatus
alaUdldPortConfigUdldMode
alaUdldPortConfigUdldStatus
alaUdldPortConfigUdldProbeintervalTimer
alaUdldPortConfigUdldDetectionPeriodTimer
alaUdldPortNeighborStatsTable
alaUdldNeighborName
OmniSwitch 6250 CLI Reference Guide
Slot number for the module and physical port number on that module.
Indicates the state of interface determined by UDLD operation, which
can be notapplicable, shutdown, undetermined or bidirectional.
Indicates the operational mode of UDLD protocol. Options include
normal or aggressive.
Indicates the UDLD status on the switch. Options include enabled or
disabled.
Indicates the UDLD status on a port. Options include enable or dis-
able.
The probe-message expected after this time period.
The detection of neighbor is expected with in this time period.
Configures the operational mode of UDLD on a specific port, a range of
ports, or all the ports.
Configures the probe-message advertisement timer on a specific port, a
range of ports, or all the ports.
Configures the echo based detection timer on a specific port, a range of
ports, or all the ports.
November 2009 page 27-15