RIP Commands
ip rip garbage-timer
Configures the RIP garbage timer value that defines the time interval, which must elapse before an expired
route is removed from the RIB.
ip rip garbage-timer seconds
Syntax Definition
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6250
Usage Guidelines
During the RIP garbage interval, the router advertises the route with a metric of INFINITY (i.e., 16 hops).
Examples
-> ip rip garbage-timer 180
Release History
Release 6.6.1; command was introduced.
Related Commands
show ip rip
MIB Objects
alaProtocolRip
alaRipGarbageTimer
OmniSwitch 6250 CLI Reference Guide
The RIP garbage timer value, in seconds. The valid range is 0–180.
default
120
Displays the RIP status and general configuration parameters (e.g.,
forced hold-down timer).
November 2009
page 33-21