Sflow Poller - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

sFlow Commands

sflow poller

Gets counter samples from ethernet driver and fills up the counter part of the UDP datagram.
sflow poller num portlist receiver receiver_index interval value
no sflow poller num portlist
Syntax Definitions
num
portlist
receiver_index
value
Defaults
parameter
receiver_index
value
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the no form of this command to delete a poller.
Examples
-> sflow poller 1 2/6-10 receiver 1 interval 30
-> no sflow poller 1 2/6-10
Release History
Release 6.6.1; command was introduced.
Related Commands
show sflow poller
OmniSwitch 6250 CLI Reference Guide
Specifies the instance id.
Specifies the interface index range.
Specifies the receiver index.
Specifies the maximum number of seconds between successive samples
(interval value).
default
0
0
Displays the poller table.
November 2009 page 37-7