IPv6 Commands
Related Commands
ipv6 redist
ipv6 rip status
ipv6 rip interface recv-status
ipv6 rip interface send-status
show ipv6 rip interface
MIB Objects
alaRipngInterfaceTable
alaRipngInterfaceStatus
OmniSwitch 6250 CLI Reference Guide
Loads RIPng into memory.
Enables or disables RIPng on the switch.
Configures IPv6 RIPng interface "Receive" status. When this status
is set to "enable", packets can be received on this interface.
Configures IPv6 RIPng interface "Send" status. When this status is
set to "enable", packets can be sent on this interface.
Displays information for all or specified RIPng interfaces.
November 2009
page 30-75