Interfaces Clear-Violation-All - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

interfaces clear-violation-all

Brings the port out of shutdown state.
interfaces slot/port[-port2] clear-violation-all
Syntax Definitions
slot/port
port2
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
•
If any interface is in the admin down state because of UDLD, then the status of the interface can be
confirmed using the show interfaces port command. The violation field indicates the reason of viola-
tion.
•
The port may again go into shutdown state if the UDLD operation determine that UDLD violation is
still not cleared.
Examples
-> interfaces 1/8 clear-violation-all
-> interfaces 1/10-14 clear-violation-all
Release History
Release 6.6.1; command was introduced.
Related Commands
show interfaces port
MIB Objects
alaUdldPortStatsTable
alaUdldPortStatsClear
page 27-12
The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
The last port number in a range of ports that you want to configure on
the same slot (e.g, 3/1-4 specifies ports 1-4 on slot 3).
Displays interface port status (up or down).
OmniSwitch 6250 CLI Reference Guide
UDLD Commands
November 2009