Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1142

Examples
-> show ip router database
Destination
-------------------+----------------+--------+------+-----
10.212.59.0/24
10.212.60.0/24
10.212.61.0/24
10.212.66.0/24
143.209.92.0/24
172.28.6.0/24
Inactive Static Routes
Destination
-----------------+--------------+------
1.0.0.0/8
output definitions
Destination
Gateway
Protocol
Metric
VLAN
Release History
Release 6.6.1; command was introduced.
Related Commands
show ip route
page 29-94
Gateway Protocol Metric VLAN
10.212.59.17 LOCAL
10.212.60.17 LOCAL
10.212.61.17 LOCAL
10.212.66.17 LOCAL
172.28.6.254 STATIC
172.28.6.2 LOCAL
Gateway Metric
8.4.5.3 1
Destination IP address. Also includes the mask prefix length notation
after the address to indicate the subnet mask value. For example, /24
indicates the destination IP address has a 24-bit mask (255.255.255.0).
IP address of the gateway from which this route was learned.
Protocol by which this IP address was learned: LOCAL, STATIC, RIP).
RIP metric or cost (hop count) for the route. Indicates a priority for the
route. The lower the metric value, the higher the priority.
The VLAN on which the route was learned, not forwarded. Note that
N/A appears in this field for static routes as they are not learned on a
VLAN.
Displays the IP Forwarding table.
1 45
1 44
1 43
1 46
1 N/A
1 6
OmniSwitch 6250 CLI Reference Guide
IP Commands
November 2009