Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1369

RIP Commands
output definitions (continued)
Interface Config AuthKey
Length
Interface Config Send-Version Interface send option (none, v1, v2, and v1 compatible). Default is v2.
Interface Config Receive-Ver-
sion
Interface Config Default Met-
ric
Received Packets
Received Bad Packets
Received Bad Routes
Sent Updates
Release History
Release 6.6.1; command was introduced.
Related Commands
ip rip interface
MIB Objects
alaProtocolRip
alaRipProtoStatus
alaRip2IfConfAugTable
alaRip2IfConfName
alaRip2IfRecvPkts
alaRip2IfIpConfStatus
rip2IfConfTable
rip2IfConfAddress
rip2IfConfAuthType
rip2IfConfAuthKey
rip2IfConfSend
rip2IfConfReceive
rip2IfConfDefaultMetric
rip2IfStatTable
rip2IfStatRcvBadPackets
rip2IfStatRcvBadRoutes
rip2IfStatSentUpdates
OmniSwitch 6250 CLI Reference Guide
The authentication key length used for the RIP interface.
Interface receive option (none, v1, v2, and both). Default is both.
Default redistribution metric. Default is 1.
Number of packets received on the interface.
Number of bad packets received and discarded. Normally this value is
zero (0).
Number of bad routes received and discarded. Normally this value is
zero (0).
Number of RIP routing table updates sent.
Enables/disables RIP for a specific interface.
November 2009 page 33-29