Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1159

IP Commands
output definitions (continued)
Remote Port
State
Release History
Release 6.6.1; command was introduced.
Related Commands
show ip interface
show tcp statistics
OmniSwitch 6250 CLI Reference Guide
Remote port number for this TCP connection. The range is 0–65535.
State of the TCP connection, as defined in RFC 793. A connection
progresses through a series of states during its lifetime:
•
Listen—Waiting for a connection request from any remote TCP
and port.
•
Syn Sent—Waiting for a matching connection request after having
sent a connection request.
•
Syn Received—Waiting for a confirming connection request
acknowledgment after having both received and sent a connection
request.
•
Established—Open connection. Data received can be delivered to
the user. This is the normal state for the data transfer phase of the
connection.
•
Fin Wait 1—Waiting for a connection termination request from the
remote TCP, or an acknowledgment of the connection termination
request previously sent.
•
Fin Wait 2—Waiting for a connection termination request from the
remote TCP.
•
Close Wait—Waiting for a connection termination request from the
local user.
•
Closing—Waiting for a connection termination request acknowl-
edgment from the remote TCP.
•
Last Ack—Waiting for an acknowledgment of the connection
termination request previously sent to the remote TCP (which
includes an acknowledgment of its connection termination request).
•
Time Wait—Waiting for enough time to pass to be sure the remote
TCP received the acknowledgment of its connection termination
request.
•
Closed—No connection state.
Displays the status and configuration of IP interfaces.
Displays TCP statistics.
November 2009 page 29-111