show udp statistics
Displays UDP errors and statistics.
show udp statistics
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
This command displays cumulative statistics since the last time the switch was powered on or since the
last reset of the switch.
Examples
-> show udp statistics
Total datagrams received
Error datagrams received
No port datagrams received =
Total datagrams sent
output definitions
Total datagrams received
Error datagrams received
No port datagrams received
Total datagrams sent
Release History
Release 6.6.1; command was introduced.
Related Commands
show udp ports
page 29-112
=
214937,
=
0,
32891,
=
211884
Total number of UDP datagrams delivered to UDP applications.
Number of UDP datagrams that could not be delivered for any reason.
Number of UDP datagrams that could not be delivered for reasons
other than lack of application at the destination.
Total number of UDP datagrams sent from this switch.
Displays the UDP Listener table.
OmniSwitch 6250 CLI Reference Guide
IP Commands
November 2009